Features
• Rectifier/Charger
• High Frequency IGBT Inverter
• Static bypass switch
• Sealed maintenance free battery
• Charger for long backup time
• Bypass switch
• Computer Control Modular design dual redundant operation increasing MTBF
• LCD Display
• Computer-Interface
|
| |
| Technical Specification |
| Model |
10KVA - 120KVA |
| Rated Power |
6KVA 10KVA 15KVA 20KVA 30KVA 50KVA 60KVA 100KVA 120KVA |
| DC Bus |
240V 360V |
| INPUT |
| Phase/Wire |
Single - Phase 2 - Wire + G OR 3 Phase 4 Wire+G
240V/230V/220V +/- 20% 415V, 400V, 380V+/-20% 45 - 55 Hz 45-55 Hz |
| OUTPUT |
| Phase/Wire |
Single- Phase 2 - Wire + G / 3-Phase 4 wire+G |
| Voltage |
230V/220V/415V |
| Waveform |
Sinewave<3%THD |
| Voltage Regulation |
+/-1% |
| Frequency |
50Hz+/- 0.2% |
| Transient Response |
+/-5% or (100% step load. 5ms recovery) |
| Overload Capacity |
120% for 30s |
| Load Power Factor |
0.8 lagging, Load PF range; 0.7 lagging to 0.8 |
| Crest ratio |
3:1 |
| Battery Type |
In Built SMF (Sealed maintenance Free) battery |
| Battery Time |
Or External Battery (can be extended to 8 hrs) |
| Recharging Time |
8 hours up to 90% capacity |
| Efficiency |
>87% |
| Accoustic noise |
<50db |
| Protection |
*Battery : Low battery off and circuit break * Short circuit electronic current limit then transfer to bypass & circuit break Overload : 120 for 30s then transfer to bypass and auto transfer * UPS fault: transfer to bypass |
| Alarm |
Mains failure: Approaching low battery. Overload, UPS fault, Mains out of limit. New alarm status will initiate the beep again |
| Indicators |
LCD Display |
| Computer Interface |
Mains failure, Low battery, Bypass, feed, Inverter Off [Supports NOVELL, Netwave, LAN Tastic, MS-DOS, Windows, Windows NT, LAN Manager.UNIX (Optional) Operating Systems] |
| Environment |
Temperature Humidity
0-40 degree C upto 95% non condencing |
| |
|
